Emerson Apparatus Setting the Standard for Precision Laboratory Testing Equipment Since 1908

 

 

 

 

NEW FIXTURES Emerson Core Holding, Basiloid Tensile, and Tape Tensile Fixtures (See Below)
Easy to Install, Set-up, and Use • Built to Emerson's Exacting Standards

 

 

 

 

 

 

 

Test Fixtures

Test fixtures for all of your crush tester and compression tester needs.

Emerson Apparatus ECT Test Fixture

Edge Crush Test Fixture

Learn More

Request Quote

Support

 

  • Meets specifications of instrument described in TAPPI Test T-839 OM 08
  • Patented Emerson ECT Holding Fixture
  • No waxing
  • No neckdown cutter
  • One sample size for all board
  • Repeatable results, less operator influence

 

  • Sample Size 2" X 2"
  • Shipping Dimensions 10" X 3" X 7"
  • Shipping Weight 6 lbs

Emerson Apparatus ECT Test Fixture

NEW! Core Holding Fixture

 

 

Request Quote

Support

 

  • Designed to facilitate core edge crush testing
  • Used with Emerson Compression Tester 5205
  • Stands cores vertically without interfering with the test results
  • Prevents the core from kicking out of the fixture, which could cause an unsafe condition
  • Tests 3" through 5" cores (using an adapter block) as well as 6" and higher core sizes

 

  • Core Sizes 3" to 10"

Emerson Apparatus ECT Test Fixture

NEW! Basiloid Tensile Fixture

 

 

Request Quote

Support

 

  • Developed for all Model 6200 to 8510 size Emerson Compression Testers
  • Test the tensile strength of Folding Cap Carton lifting points using the compressive force of your Emerson Compression Tester
  • Easy installation using the Emerson quick-connect mount points
  • High force basiloid clamps allow basiloid samples to be easily installed and held securely throughout this high force destructive test
  • Easy test setup using standard test parameters and simple settings to ensure easy and safe operation
  • Test settings may be saved and retrieved for convenient and fast selection of test parameters
  • Fixture design allows easy insertion and removal of the sample for faster testing
  • Easy fixture removal allows you to return quickly to normal compression testing duties with your Emerson compression tester

 

  • Fixture can be oriented side-to-side, front-to-back, or at a 45° angle per operator preference and to accommodate platen size

Emerson Apparatus ECT Test Fixture

NEW! Tape Tensile Fixture

 

 

Request Quote

Support

 

  • Developed for all Model 6200 to 8510 size Compression Testers

  • Test the tensile strength of tapes using the compressive force of your Emerson Compression Tester

  • Easy installation using the Emerson quick-connect mount points
  • High force tape clamp jaws allow tape samples to be easily installed and securely held WITHOUT patterned surfaces that could reduce the tape strength for testing
  • Easy test setup using standard test parameters and simple settings to ensure easy and safe operation
  • Test settings may be saved and retrieved for convenient and fast selection of test parameters
  • Fixture design allows easy insertion and removal of the sample for faster testing
  • Easy fixture removal allows you to return quickly to normal compression testing duties with your Emerson compression tester

 

 

Emerson Apparatus Model 6200 Compression Tester

Ring Crush Test Fixture

Learn More

Request Quote

Support

 

  • Precision Disk Sets to cover calipers from <.0050" to >.0390" as prescribed in TAPPI Test Method T-818 and T-822
  • 12-piece set for calipers <.0050" to >.0390"
  • Hardened steel posts and bushings maintain fixture concentricity for life
  • Mounting block stores entire set

 

  • Ring Crush Sample Cutter 1/2" x 6" also available

Emerson Apparatus Pin Adhesion Test Fixture

Pin Adhesion Test Fixture

 

 

Request Quote

Support

 

  • Determine the characteristics and strength of bond formed during the corrugating operation
  • Select-side and weak-side pin adhesion fixtures designed for ease of assembly with test sample
  • Custom pin spacing, as well as double-wall fixtures, made to order

 

  • TAPPI T-821 (Selective)
  • A, B, C Flute Fixtures available
  • Non-selective Fixtures
  • Custom Fixtures

Emerson Apparatus Flat Crush Test Fixture

Flat Crush Test Fixture

 

 

Request Quote

Support

 

  • TAPPI T-825
  • Fixture keeps sample from "racking"

 

 

Emerson Apparatus Cobb Tester

Cobb Test Fixture

 

 

Request Quote

Support

 

  • Single hand clamping and release
  • Made with stainless steel
  • Applications for paper, board, corrugated

 

  • Stainless steel hand roller required
  • Blotting paper available

Can't Find What You Need?
Emerson Apparatus offers custom engineering and design services. Contact our sales team today to explore how we can design a solution just for you!