The Ross Rubber Flexing Machine is designed to determine the resistance of vulcanized or synthetic elastomers to cut growth. It conforms to ASTM Method D1052. For low-temperature flexing, the AR6 flexer is mounted in a cold chamber capable of sustaining -40°F during operation. |
 |
|
Features |
- For low-temperature flexing
- Mounted in a cold chamber capable of sustaining -40°F during operation
- Stainless steel manufacture prevents rust due to condensation
- Motor is mounted outside the chamber and drives the flexer by way of a coupling
- Can test six pairs of samples simultaneously (12 total)
- Tests sample thicknesses ranging from 1/8" to 1/2"
- Frequency of the flexures is 100 cycles per minute
- Six-digit counter tallies actual flexures
- Self-contained with a 115 volt, 1/3 HP gear motor
- Digital temperature controller
- Audible/visual alarm
- Key-locking door and casters
- Pre-assembled and furnished ready for use
- Complies with ASTM D1052 and FED CCC-C-501A (coated cloth)
|
|
|
Specifications |
- Temperature range +70°F to -40°F
- Net weight 500 lbs
- Shipping weight 595 lbs
- Cubic 9.4 cu ft
- Internal dimensions 19"H x 49"W x 17"D (includes sublids)
- External dimensions 41"H x 60"W x 28"D
- Volts 115VAC
|
|
|
Accessories/Options |
- Emerson also manufactures aging apparatus conforming to ASTM D572 and D573. Please contact sales for details.
|
|
|
 |
|
|
Image shows cold chamber unit similar to (but smaller than) the one housing AR6 flexer. AR6 flexer not shown. |
| |
|
